List of Codes Representing Environmental Business Specialization

Air

  1. Air sampling/laboratory analysis
  2. Continuous-basis monitoring
  3. Air pollution control/flue gas purification equipment (e.g. filters, scrubbers)
  4. Gas detection/warning devices
  5. Emission abatement/cleaner production (e.g. low emission burners)
  6. Instrumentation and process control/software
  7. Research and development of environmental technologies
  8. General consulting services

Water

  1. Monitoring
  2. Sampling/laboratory analysis
  3. Construction of supply networks
  4. Inspection and reconditioning of existing supply networks
  5. Treatment processes
  6. Advanced (tertiary) treatment processes (e.g. UV/ozonation, activated carbon)
  7. Water recycling and reuse
  8. Instrumentation/process control/software
  9. Research and development of environmental technologies
  10. General consulting services

Wastewater

  1. Monitoring
  2. Sampling/laboratory analysis
  3. Construction of collection networks
  4. Inspection and reconditioning of existing collection networks
  5. Physical, chemical, and biological treatment processes
  6. Advanced treatment processes (e.g. nitrogen and phosphate removal, etc.)
  7. Sludge treatment and disposal
  8. Water recycling and reuse
  9. Facility operation
  10. Pollution prevention/waste minimization
  11. Spill control and containment
  12. Quality restoration and decontamination
  13. Instrumentation/process control/software
  14. Research and development of environmental technologies
  15. General consulting services

Waste

  1. Waste collection/transportation and storage
  2. Sample analysis/waste characterization
  3. Site monitoring
  4. Landfill disposal
  5. Incineration
  6. Composting/biomass conversion
  7. Pollution prevention/waste minimization
  8. Recycling/resource recovery
  9. Spillage control/decontamination
  10. Research and development of environmental technologies
  11. General consulting services

Energy

  1. New/efficient energy and heat generation systems
  2. Retrofitting/rehabilitation of existing systems
  3. Process management and control (e.g. boiler tune-up, fuel efficiency optimization)
  4. Heat recovery and energy savings (e.g. insulation)
  5. Alternative/renewable energy systems (e.g. geothermal, biomass, solar)
  6. Alternative (non-CFC) refrigerants
  7. Instrumentation
  8. Research and development of environmental technologies
  9. General consulting services

Soil and Land

  1. Underground storage tank removal
  2. Site remediation and clean-up of contaminated land
  3. Geological and technological tests and surveys
  4. Drilling and hydrological surveys
  5. Agriculture (fertilizer, pest control, etc.)
  6. Research and development of environmental technologies
  7. General consulting services

Industrial Safety and Noise Control

  1. Instrumentation/measuring and control devices
  2. Gas detection/warning devices
  3. Protection equipment
  4. Abatement (insulation, absorbing)
  5. Facility operation
  6. Electromagnetic field exposure
  7. Research and development of environmental technologies
  8. General consulting services

Environmental Planning and Management

  1. Environmental audits
  2. Environmental management systems (ISO 14000, EMAS)
  3. Regional planning (e.g. urban, land use, landscape and transportation planning)
  4. Water resource management (e.g. ground and surface water)
  5. Environmental impact assessment
  6. Policy decision support
  7. Training and education


REC * PUBLICATIONS * ENVIRONMENTAL TECHNOLOGY MARKET - BALTICS * LIST OF CODES

COVER PAGE HOME PAGE